Care of the water and maintenance of your swimming pool are fundamental factors to consider if you have a swimming pool. For complete safety and quality control, your pool has to comply with the basic requirements.
In this article, we will discuss the different ways to clean and maintain your swimming pool. The important factor is to regularly be on top of it to avoid costly mistakes from arising.
When you carry out pool maintenance regularly, the risks of accidents and issues reduces tremendously. Just as preventive maintenance helps in different areas of life, it also helps to decrease the lifecycle cost on your pool. Let’s get right to it, shall we?
Tips for Keeping Your Pool Clean
Check the PH of the Pool
It is important to do regular pool pH checks twice a week during summertime and once every two weeks during wintertime. The standard pH of a pool should be between 7.2 and 7.8 – your pool will need less chlorine if it has a lower PH using this scale.
Chlorine becomes less active as the pool PH rises which is why most pool owners keep adding chlorine to their pools. When you check and control the pH of your pool appropriately, you will need to use less chlorine on your pool.
Regular Skimmer Basket(s) Cleaning
The basic job of the skimmer is to catch contaminants on the pool surface before they float down to the bottom. When the skimmer skims the surface of the pool regularly, it helps to maintain the circulation system of the pool effectively, thus reducing the need for chlorine.
The skimmer is very important to keep the pool sparkly clean which is why it needs to be cleaned out regularly – at least once a week.
Lint Pot Cleaning
Cleaning the lint pot which is on the front of the pool pump should be done regularly. To clean it, you have to turn the pump off to the release the pressure on the system.
For clarity, the lint pot is the basket located inside the swimming oil pump. Regularly cleaning out this pot will reduce the contaminants found in the water considerably.
Perform Water Level Checks
The water level of your pool must be at the center level of the pool skimmer – this is best for ideal performance and outcomes.
If the water level is low, it can make the pump run dry which will result in it burning up. On the other hand, if it is too high, the door of the skimmer which keeps debris away will not work effectively.
Do Regular Chlorinator and Ozonator Checks
If you have a chlorinator, you need to check it frequently for possible clogging, chlorine tablet levels, and other factors. A chlorinator helps to add the right amount of chlorine needed. On the other hand, if you have an Ozonator, you have to ensure that is on and is functioning properly.
The use of ozone and/or UV reduces the amount of chlorine needed by your pool. You must be familiar with how the type you have works.
Perform Chlorine Generator Checks
When you have a salt system or a salt pool, a chlorine generator helps to produce chlorine for you. With this, you do not need to buy, store or directly handle the chlorine generated. However, you have to ensure that the cell of the generator is kept clean at all times and the pH of the pool plays a critical role here.
This system is effective when properly understood – lack of understanding will result in some risks which can be avoided.
Pool Filters Cleaning
You must clean your pool filter regularly as they ensure high flow rates, no backwashing, and clean water. Depending on the weather conditions where the pool is located, they need to be cleaned once every one or two months.
You can clean the filters using a 10% solution of muriatic acid or Trisodium Phosphate. It is important that you wear gloves and eye protection – remember to add acid to water and not water to acid.
Regular Brushing of the Pool Walls
Regularly brushing the walls of your pool will help eliminate algae and calcium build up. The type of brush you should use depends on the type of pool you have. If you have a concrete pool, make use of a stiff brush. If you own fiberglass, vinyl, or tiled pools, you need to use a softer brush.
You can remove slag using a non-abrasive liquid and sponge. On the other hand, a pumice stone will work for stains. Before making use of any chemical, endeavor to check with the pool manufacturer.
Benefits of a Clean Pool
There are several advantages of having a clean pool, one of which is the fact that you can swim without risks. Highlighted below are some benefits of having a clean pool.
It Serves as an Effective Entertainment Tool
There is nothing better than having a clean pool that people can use! This way, you can host and entertain guests effectively. A clean pool is inviting and when the risk of having a dirty pool is eliminated (skin issues, diseases, algae), everyone will have fun.
When you have a clean pool, the cost of maintenance reduces tremendously. Regular cleaning and maintenance of your pool will keep the pH balanced and pool clean – this will help the pool surface last longer.
It is Healthy to have a Clean Pool
No one wants to swim in a dirty pool where they are risks of getting an infection. When you maintain and clean your pool regularly, risks of having bacteria and germs in the pool will reduce.
The prevalence of algae and microbes will also increase the risk of accidents as they make the surface slippery. Having a clean pool will make your swimming comfortable and risk-free.
To Wrap It Up
The pool water lifecycle is linked to the season of the year so the treatment and maintenance of the pool will vary according to season.
Even though you can take care of most of the cleaning and maintenance of the pool, it is advisable to leave some aspects in the hands of experienced professionals to avoid risks and accidents.